Need some help installing your new Pint Bumpers? Not a problem, we got you!
We know they can be a bit tricky. First, we recommend you watch this video:
How to Install: Onewheel Pint Bumpers
We know they can be a bit tricky. First, we recommend you watch this video:
How to Install: Onewheel Pint Bumpers
Below are the steps to successfully install your new bumpers:
1- Remove the fender or "fender delete" prior to installing your bumpers
2- Place the bumpers in between the rails on the appropriate side
3- Apply some pressure to the end of the bumper, pushing it towards the tire, tapping it into position
4- If the holes on the rail and the inserts on the bumper do not align, apply light pressure on the flat part of the bumper next to the screw hole to lower the corner plastic. This will lower one of the inserts to align with the screw, allowing it to be installed easier
5- Tightening both screws closest to the tire will cause the rest of the screw holes to align and fully install the bumper
1- Remove the fender or "fender delete" prior to installing your bumpers
2- Place the bumpers in between the rails on the appropriate side
3- Apply some pressure to the end of the bumper, pushing it towards the tire, tapping it into position
4- If the holes on the rail and the inserts on the bumper do not align, apply light pressure on the flat part of the bumper next to the screw hole to lower the corner plastic. This will lower one of the inserts to align with the screw, allowing it to be installed easier
5- Tightening both screws closest to the tire will cause the rest of the screw holes to align and fully install the bumper
We hope this helps you get back to shredding with your new and improved board!